Design and Engineer Solutions

Grades:
5-8
Unit:
Adrift in a Sea of Plastic
Lesson Number:
4
Description:

This lesson is designed to span 9 days with 50-minute sessions. The students will use a Design and Engineering Journal to guide them in the design and engineering process. In small groups they will use the research from lesson 2 to formulate solutions to...

Energy Content:
Circuitry,
Electrical Energy,
Materials Science,
Next Generation Manufacturing,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will take part in the engineering design process.Students will use problem solving skills to make changes to designs.Students will use speaking and listening skills to give presentations and listen to others give their presentation.
Pedagogy & Practice:
21st Century Skills Development,
Culturally Sustaining,
English Language Strategies,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3,
MS-ESS3-3,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Other Subjects Covered:
Computer Science,
Environmental Sciences,
ELA: Speaking & Listening,
Math: Geometry,
Math: Graphing & Representation,
Math: Measurement
Estimated Activity Length:
7 hours

Cost Effective Solar Cells: Solar Panel Data Sharing

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
4
Description:

This lesson is designed to be completed in one 40-minute section. The teacher will facilitate the sharing of student solar panel data from indoor and outdoor testing with fans, music circuits, LEDs and any other combinations that were constructed. Teachers...

Energy Content:
Circuitry,
Electrical Energy,
Electricity Generation,
Electrons,
Energy Fundamentals,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will analyze and share out power generation results with classmates
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Project-Based Learning
NGSS Science and Engineering Practices:
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
8: Obtaining, Evaluating, and Communicating Information
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Estimated Activity Length:
0 sec

Part 2 - Lesson 1: Renewable Energy Panel

Grades:
6-12
Unit:
A Community Powered by Renewable Energy
Lesson Number:
4
Description:

Students will meet with local planners or other available energy experts to discuss public policy regarding the use of wind turbines and solar arrays to generate electricity. Students develop questions for a panel of professionals regarding considerations...

Energy Content:
Electrical Energy,
Electrical Grid (Transmission & Distribution),
Electricity Generation,
Microgrids,
Solar Photovoltaic,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will gain background information regarding the limitations of having and wind and solar generating infrastructure within city and county limits, including environmental, aesthetic, and cultural considerations. 2.Students will compile criteria for placement of wind and solar energy sources.
Pedagogy & Practice:
21st Century Skills Development,
Empathetic Engineering,
Engineering Design,
Establishing a Culture of Science,
Multiple Learning Styles,
Phenomena-Driven Instruction,
Place-Based Learning,
Project-Based Learning,
Research-Primary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
3: Planning and Carrying Out Investigations,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
HS-ESS3-2
Other Subjects Covered:
Environmental Sciences,
CTE: Career & Technical Education,
Social Sciences: Analysis,
Social Sciences: Civics,
Social Sciences: Geography
Estimated Activity Length:
1 hour
Sphero SPRK+

Solar SPRK+: Chariot Engineering Design

Grades:
6-8
Unit:
Solar SPRK+
Lesson Number:
5
Description:

Students will work through the engineering design process to build a chariot for their SPRK+ that will carry their solar panels through a maze to a charging station. Students will draft prototypes, test their designs, and make changes to their design based...

Energy Content:
Circuitry,
Electrical Energy,
Electronics,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will identify possible design solutions to have a Sphero SPRK+ pull solar panels as a portable power source.Students will work in groups to determine the best possible designs and construct and test these designs with their team.Students will determine the strengths and weaknesses of each design and incorporate these findings into further construction phases.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
6: Constructing Explanations and Designing Solutions
Author:
Deb Frankel
Relevant NGSS PE:
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Other Subjects Covered:
Computer Science
Estimated Activity Length:
2 hours
Basic Stamp Microprocessor

Integrating Solar Power

Grades:
9-12
Unit:
Robotic Sunflower
Lesson Number:
5
Description:

At this point students should have a working robotic sunflower that will track the sun with 2 degrees of freedom. This next lesson powers the whole system with a photovoltaic module. A Zener diode is used to charge a 6V motorcycle battery which then...

Energy Content:
Circuitry,
Electrical Energy,
Electronics,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will create voltage regulator and construct a solar battery charger.
Pedagogy & Practice:
21st Century Skills Development,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
6: Constructing Explanations and Designing Solutions
Author:
Pat Blount
Relevant NGSS PE:
HS-ETS1-1,
HS-ETS1-2,
HS-ETS1-3,
HS-PS3-1,
HS-PS3-3
Other Subjects Covered:
Computer Science
Estimated Activity Length:
1 hour

Cost Effective Solar Cells: Copper Oxide Solar Cell Construction and Testing

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
5
Description:

This lesson is designed to be completed in one 80-minute section, but can be done in two 40-minute sections. The teacher will facilitate student construction of copper oxide plates with electric burners or hot plates. Teachers will guide students in...

Energy Content:
Circuitry,
Electrical Energy,
Electricity and Magnetism,
Electricity Generation,
Electrons,
Energy Fundamentals,
Light (Visible),
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will construct an oxidized copper sheet solar cell Students will test an oxidized copper sheet solar cell for voltage and current
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Estimated Activity Length:
2 hours

Part 2 - Lesson 2: Wind Energy

Grades:
6-12
Unit:
A Community Powered by Renewable Energy
Lesson Number:
5
Description:

Students will learn about wind and how wind varies across geographies. Students will use Vernier Wind Turbine kits or homemade wind turbines to experiment with blade angles and wind speed. During experimentation, students will collect data as blade angles...

Energy Content:
Electrical Energy,
Electricity Generation,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will conduct an experiment where blade angles are the variable and wind speed is constant.2.Students will conduct an experiment where blade angles are constant and wind speed varies.3.Students will collect and analyze data to provide a conclusion to the questions: What is the optimal blade angle for generating the most energy? What is the optimal wind speed for generating the most energy?4.Students will research prevailing winds and use a provided map of their region to indicate wind speed and direction.5.Students will propose locations for wind farms based on optimal energy generation and zoning restrictions.6.Based on their proposals, students will determine a range of potential kilowatt generation from wind power.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Multiple Learning Styles,
Phenomena-Driven Instruction,
Place-Based Learning,
Project-Based Learning
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
MS-ESS3-3,
MS-ESS3-4,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-ETS1-4,
MS-PS3-2,
HS-ESS3-2,
HS-ESS3-4,
HS-ETS1-1,
HS-ETS1-2,
HS-ETS1-3,
HS-ETS1-4,
HS-PS3-3
Other Subjects Covered:
Math: Measurement,
Social Sciences: Geography
Estimated Activity Length:
10 hours
Sphero SPRK+

Solar SPRK+: Final Challenge and Presentation

Grades:
6-8
Unit:
Solar SPRK+
Lesson Number:
6
Description:

In this lesson, students will navigate through a maze using their SPRK+ in order to reach the solar charging station. Students will redesign their chariot in order to meet the needs of this new maze in order to carry their solar panels to the charging...

Energy Content:
Circuitry,
Electrical Energy,
Electronics,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will combine SPRK+ programming with the construction of a compatible chariot in order to guide their SPRK+ “Mars rover” to carry solar panels to a charging station.Students will present a final project to the class that summarizes their knowledge about the scientific background knowledge tied to this project as well as their design and testing process.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
8: Obtaining, Evaluating, and Communicating Information
Author:
Deb Frankel
Relevant NGSS PE:
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3
Other Subjects Covered:
Computer Science,
ELA: Speaking & Listening,
ELA: Writing
Estimated Activity Length:
8 hours

Cost Effective Solar Cells: Copper Oxide Cell Data Sharing

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
6
Description:

This lesson is designed to be completed in one 40-minute section. The teacher will facilitate the sharing of student solar cell data from indoor and outdoor testing through a gallery walk session. Variables such as lighting, photovoltaic effect, copper...

Energy Content:
Circuitry,
Electrical Energy,
Electricity and Magnetism,
Electricity Generation,
Electrons,
Energy Fundamentals,
Solar Photovoltaic,
Sources of Energy
+
-
More Details Less Details
Learning Goal(s):
Students will share and analyze oxidized copper sheet solar cell data
Pedagogy & Practice:
21st Century Skills Development,
English Language Strategies,
Engineering Design,
Establishing a Culture of Science
NGSS Science and Engineering Practices:
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Other Subjects Covered:
ELA: Speaking & Listening
Estimated Activity Length:
1 hour

Cost Effective Solar Cells: Titanium Dioxide Solar Cell Construction and Testing

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
7
Description:

This lesson is designed to be completed in two 80-minute sections. The teacher will show a basic procedure and video. The teacher will facilitate the construction of Organic Dye-Sensitized solar cells on coated glass plates with Titanium Dioxide. A fume...

Energy Content:
Circuitry,
Electrical Energy,
Electricity and Magnetism,
Electricity Generation,
Electrons,
Energy Fundamentals,
Materials Science,
Solar Photovoltaic,
Sources of Energy
+
-
More Details Less Details
Learning Goal(s):
Students will construct titanium dioxide coated “raspberry juice” solar cellsStudents will test titanium dioxide coated “raspberry juice” solar cells under various conditions 
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Multiple Learning Styles
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Estimated Activity Length:
3 hours

Pages