Solar Mobile

Exploring Circuits and Optimum Power

Grades:
6-8
Unit:
Solar Mobile Design Challenge
Lesson Number:
2
Description:

This lesson is an exploratory learning cycle that will give the instructor input as to where students are in their understanding of circuits and also scaffolds student learning. This lesson starts by engaging students by using an Energy Stick. Then,...

Energy Content:
Circuitry,
Electrical Energy,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students build series circuits using “grain of wheat bulb” and LEDs powered by various low voltage solar panels. Students build parallel circuits using grain of wheat and LED bulbs powered by various low voltage solar panels. Students demonstrate and draw the energy transfer using solar energy. Students draw a circuit diagram of their final optimal circuit. Students design an optimal circuit model that will be used in their final project. 
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning,
STEAM/Arts
NGSS Science and Engineering Practices:
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking
Author:
Kristy Schneider
Other Subjects Covered:
ELA: Writing,
Math: Algebra,
Math: Measurement
Estimated Activity Length:
3 hours
Solar Charger Diagram

Can Portable PV Charge Vehicles?

Grades:
10-12
Unit:
Solar Transportation
Lesson Number:
3
Description:

In this lesson, students will begin to explore the potential and challenges related to using photovoltaics to supplement the power needed to charge batteries in BEVs. Students will test a variety of wiring options related to series and parallel wiring....

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Energy Fundamentals,
Fuels,
Solar Photovoltaic,
Transportation
+
-
More Details Less Details
Learning Goal(s):
Students will explore the role of series and parallel wiring as they pertain to voltage and amperage.Students will explore the processes involved with charging batteries and relate these processes to voltage and amperage.Students will test photovoltaic modules to identify voltage and amperage outputs.Students will calculate, using data from field tests, the maximum power that can be produced using photovoltaics within the constraints of a typical passenger vehicle’s surface area.Students will calculate charging times using various PV array power ratings.
Pedagogy & Practice:
Group Work/Collaboration,
Hands-on Materials
NGSS Science and Engineering Practices:
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking
Author:
Clayton Hudiburg
Relevant NGSS PE:
HS-ESS3-2,
HS-ESS3-4,
HS-ETS1-1,
HS-ETS1-2,
HS-ETS1-3,
HS-PS3-2
Other Subjects Covered:
ELA: Writing,
ELA: Vocabulary Development,
Math: Addition, Subtraction, Multiplication, Division,
Math: Algebra,
Math: Measurement
Estimated Activity Length:
2 hours
Kill-A-Watt_Meter

How much energy do YOU use?

Grades:
7-8
Unit:
Solar vs. Wind Energy
Lesson Number:
3
Description:

Students will learn the difference between energy and power. They will then use this new understanding to compare the energy and power difference of light bulbs (incandescent, halogen, fluorescent, and LED) using a tool called a “Kill-A-Watt” meter....

Energy Content:
Electrical Energy,
Energy Efficiency,
Energy Fundamentals
+
-
More Details Less Details
Learning Goal(s):
Students will be able to: • Explain the difference between power and energy • Proficiently use a “Kill-A-Watt” meter to determine the power and total energy usage of everyday devices • Compare the total energy used by common household devices • Brainstorm different ways we can conserve electrical energy
Pedagogy & Practice:
Field Work,
Hands-on Materials,
Research-Primary
NGSS Science and Engineering Practices:
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
8: Obtaining, Evaluating, and Communicating Information
Author:
Craig Marais
Relevant NGSS PE:
MS-ESS3-3,
MS-PS3-3
Other Subjects Covered:
Math: Addition, Subtraction, Multiplication, Division,
Math: Algebra,
Math: Measurement
Estimated Activity Length:
0 sec

Creating the Most Effective Solar Heater

Grades:
6-8
Unit:
Experimenting with Solar Heaters
Lesson Number:
3
Description:

This part can be staged as a competition or simply a personal challenge to beat the standard solar heater created in part 1. During this stage of the lesson students are asked to analyze data and results from part 2 and identify which characteristics of a...

Energy Content:
Solar Thermal,
Thermal Energy (Heat)
+
-
More Details Less Details
Learning Goal(s):
In this activity students demonstrate the ability to evaluate competing solutions to the problem of increasing the heat energy transferred to a vial of water.
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
8: Obtaining, Evaluating, and Communicating Information
Author:
Nathan Franck
Relevant NGSS PE:
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
MS-PS3-3
Other Subjects Covered:
ELA: Writing,
Math: Addition, Subtraction, Multiplication, Division,
Math: Algebra,
Math: Measurement
Estimated Activity Length:
1 hour

Part 1- Lesson 3: Home Energy Audit

Grades:
6-12
Unit:
A Community Powered by Renewable Energy
Lesson Number:
3
Description:

During this lesson, students will focus on where energy is used within their homes, how energy consumption is calculated, and how energy consumption can be reduced. Students will conduct a home energy audit and determine multiple ways to reduce energy...

Energy Content:
Circuitry,
Demand Response,
Electrical Energy,
Electronics,
Electrons,
Energy Efficiency,
Smart Grid
+
-
More Details Less Details
Learning Goal(s):
1.Students will identify all ways that energy is consumed within their homes.2.Students will perform an energy audit of their home and calculate the amount of energy used by each electronic device and appliances.3.Students will create a spreadsheet demonstrating the electricity required to operate each electronic device and appliance, along with a summary of finding that clearly identifies how energy consumption can be reduced within their home.4.Students will explore various ways to reduce energy (goal is 30% reduction).5.Students will propose a variety of energy reduction plans and present those options to their families for discussion.6.After discussion with their families, students will itemize the agreed upon plan and identify specific actions that result in quantifiable outcomes that will implemented to reduce energy consumption by their families.
Pedagogy & Practice:
21st Century Skills Development,
Empathetic Engineering,
Engineering Design,
Field Work,
Hands-on Materials,
Multiple Learning Styles,
Phenomena-Driven Instruction,
Place-Based Learning,
Project-Based Learning,
Research-Primary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
MS-ESS3-4,
MS-ETS1-1,
MS-ETS1-2,
MS-ETS1-3,
HS-ESS3-2,
HS-ESS3-4,
HS-ETS1-1,
HS-ETS1-2,
HS-ETS1-3,
HS-ETS1-4
Other Subjects Covered:
Math: Addition, Subtraction, Multiplication, Division,
Math: Algebra,
Math: Functions,
Math: Measurement,
Math: Ratios & Proportions
Estimated Activity Length:
4 hours
Solar Rooftop

Solar Site Assessment

Grades:
9-12
Unit:
Solar Resources Assessment
Lesson Number:
4
Description:

Students will do an actual site assessment to determine the available solar resource for a chosen location.

Energy Content:
Electrical Energy,
Electricity Generation,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will be able to use a Solar Pathfinder to determine the amount of solar resource lost to shading from nearby trees, buildings, etc. Students will be able to calculate the number of kWh of electricity that can be produced in a specific location and in a specific sized area. Students will be able to calculate the amount of carbon emissions that can be offset due to installing photovoltaic panels of various sizes. Students will be able to calculate the size array needed to offset all electricity use for the high school.
Pedagogy & Practice:
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning
NGSS Science and Engineering Practices:
3: Planning and Carrying Out Investigations,
5: Using Mathematics and Computational Thinking,
8: Obtaining, Evaluating, and Communicating Information
Author:
Clayton Hudiburg
Relevant NGSS PE:
HS-ESS3-2,
HS-ESS3-4,
HS-ETS1-1,
HS-ETS1-2,
HS-ETS1-3,
HS-PS3-2
Other Subjects Covered:
Math: Addition, Subtraction, Multiplication, Division,
Math: Algebra,
Math: Measurement
Estimated Activity Length:
1 hour

Pages