Hot Pack

Unit Plan - Chemical Differences in Emergency Energy Sources

Grades:
7-8
Description:

Students develop atomic and molecular models of energy resources, analyze combustion of various fuels and build circuits with Photovolatic (PV) modules to evaluate and suggest revisions to a disaster preparedness supply list. They then research and...

+
-
More Details Less Details
Learning Goal(s):
To build empathy for people in emergency situations and an understanding of how access to energy resources can increase one’s safety, health, and comfort. To understand the nature of a variety of energy needs and how different applications have different optimal solutions. To develop models to explain the molecular and extended structures of energy resources, including how the resources change when energy is generated (Electron movement in PV cells, combustion reactions in fuel). To understand that the properties of substances depends upon the atomic / molecular structure, which changes with chemical reactions. To build a circuit that includes a solar module and measure the voltage and current. To gather and evaluate information to describe the impact on society of converting natural resources into PV cells. To design, build and test a device that uses a chemical reaction to generate or absorb thermal energy. Evaluate and revise a plan for the energy resources one should store to prepare for a natural disaster. 
Author:
Melody Childers
Estimated Activity Length:
0 sec
Solar Updraft Tower

Solar Updraft Towers Unit Overview

Grades:
3-8
Description:

Students will combine research, direct observations, and hands-on investigation to lead them into an engineering design project involving the construction of a solar updraft tower. During this process, students will make references to specific phenomena...

+
-
More Details Less Details
Learning Goal(s):
Students will understand ten renewable and non-renewable energy sources on the earth.Students will learn the locations of different energy sources on the earth.Students will learn the history of energy sources and how humans have used them.Students will learn about innovations and inventions used to find, recover, store, and release energy for human consumption.Students will understand that hot air risesStudents will understand why hot water and hot air rise and cold air and cold water sink.Students will learn that wind is produced by warm air rising and cold air sinking.Students will learn that the energy of moving hot air can be converted into other forms of energy.Students will understand that energy from the sun can be converted into heat.Students will discuss the effects of the chimney stack phenomenon.Students will understand that wind energy can be converted into other forms of energy.Students will determine different methods to increase the effectiveness of a wind turbine blade by harnessing and converting the mechanical energy of the wind.Students will determine that thermal energy resulting from the sun’s radiation can create an updraft that will power a turbine to spin.                                       Students will identify characteristics of turbine design that improve the success of their device.Students will utilize content from previous phenomena they investigated, such as the chimney stack effect and Norwegian candle toys, to determine how to best harness the energy transformed by their device from the sun.Students will be able to define and explain what a solar updraft tower is.Students will make connections between their previous engineering challenge and a real world solution to the world’s growing energy demands.
Author:
Lisa Morgan
Estimated Activity Length:
10 hours

Unit Plan: A Community Powered by Renewable Energy

Grades:
6-12
Description:

In this three-part comprehensive place-based and project-based unit, students will learn and apply rebnewable energy content to devise action plans at an individual, family, and local level. Students will use primary and secondary research explore energy...

+
-
More Details Less Details
Learning Goal(s):
LEARNING GOALS – PART 11.Students will define and explain the differences between renewable and non-renewable energy sources.2.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing wind and solar energy. 3.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing fossil fuels.4.Students will generate questions about the greenhouse gas effect, identify and isolate variables, and then conduct an experiment to answer a class generated question about the greenhouse gas effect.5.Through Socratic seminar, students will use the knowledge gained over the course of this lesson to discuss the potential long- and short-term benefits and drawbacks of using fossil fuels, solar energy, and wind energy.6.Students will define scientific vocabulary related to electricity.7.Students will be able to describe how electricity moves through a conductor.8.Students will draw and describe series and parallel circuits.9.Students will identify ways that energy is consumed within their homes.10.Students will perform an energy audit of their home and calculate the amount of energy used by each electronic device and appliances.11.Students will create a spreadsheet demonstrating the electricity required to operate each electronic device and appliance, along with a summary of finding that clearly identifies how energy consumption can be reduced within their home.12.Students will explore various ways to reduce energy (goal is 30% reduction).13.Students will propose a variety of energy reduction plans and present those options to their families for discussion.14.After discussion with their families, students will itemize the agreed upon plan and identify specific actions that result in quantifiable outcomes that will implemented to reduce energy consumption by their families.LEARNING GOALS – PART 21.Students will gain background information regarding the limitations of having and wind and solar generating infrastructure within city and county limits, including environmental, aesthetic, and cultural considerations. 2.Students will work with professionals to compile criteria for placement of wind and solar energy sources.3.Students will conduct experiments to collect and analyze data to provide a conclusion to the questions: What is the optimal blade angle for generating the most energy? What is the optimal wind speed for generating the most energy?4.Students will use prevailing wind data in your region to examine energy output of various sized small wind turbines as wind speeds incrementally increase.5.Based on local wind speeds, students will determine a range of potential kilowatt generation from wind power.6.Students will conduct experiments to determine how electrical output of solar panels change as the tilt, azimuth, and shade coverage change.7.Students will generate, compare, and evaluate various solar configurations for a solar project in your region.LEARNING GOALS – PART 31.Students will utilize previously acquired information about energy needs to create a renewable energy proposal for your town or city.2.Students will perform a solar audit on their homes and use class averages to project the amount of solar energy that can be generated on residential properties.3.Students will assess where commercial and municipal solar projects can occur within your town or city to meet the energy needs for non-residential consumers.4.Students will determine potential locations for larger-scale wind and solar farms to augment the remaining energy needs of the community.5.Students will prepare a comprehensive renewable energy plan that totals the calculations for potential residential, commercial, and agency renewable energy generation.6.Students will calculate the average amount of energy generated by wind turbines and solar panels in various conditions to determine the quantity of renewable energy sources required to power the city.7.Students will use their projected energy calculations to propose a combination of wind and solar sources to meet your locality’s energy needs, based on benefits and drawbacks of each source of energy.8.Based on prevailing winds and building orientation, students will explore potential sites for wind turbines and solar panels.9.Students will develop a final proposal to meet future energy needs through a combination of energy generation and reduction of energy consumption, prepare a brief slide presentation that summarizes their comprehensive plans, and present their finding to local energy conservation groups and local government staff or elected officials.
Author:
Jonathan Strunin
Estimated Activity Length:
10 hours

Unit Plan: Understand E-Waste Through Battery Design

Grades:
4-5
Description:

In this lesson students will further explore their understanding of energy, electricity, and basic circuits. Students will begin their exploration of batteries by questioning where batteries end up when we are done using them, making connections to e-waste...

+
-
More Details Less Details
Learning Goal(s):
1.Students will make connections to real world problem solving with e-waste.2.Students will explore battery design and transfer of energy through hands on experiments with household items.3.Students will evaluate and analyze problems with e-waste and research solutions.4.Students will draw and label models to explain circuits demonstrating the movement of energy.5.Students will be able to explain how the measured and compared batteries based on the knowledge learned about volts and using a voltmeter.
Author:
Jonathan Strunin
Estimated Activity Length:
10 hours
Constructing Solar Panels

Solar Panel Construction, Orientation and Use Unit

Grades:
9-12
Description:

For this extended task, students will track the sun's altitude and Azimuth to determine the best position for their hand-built solar panel, learn solar cell operation basics, solar panel construction, series and parallel circuitry and basic array sizing...

+
-
More Details Less Details

Adrift in a Sea of Plastic Unit Plan

Grades:
5-8
Description:

In this unit students will investigate the phenomena of plastic trash islands floating in the Pacific and Atlantic Oceans. The students will work to solve the problem of plastic trash islands through the engineering and design process. Using 3D printers,...

+
-
More Details Less Details
Learning Goal(s):
·       Students will design 3D models using Tinkercad software.·       Students will define the problem of plastic trash islands.·       Students will describe possible solutions to the problem of plastic trash islands.·       Students will research the plastic trash problem and create google slideshows the problem and how we might fix it.·       Students will investigate different ways to build structures that both float and hold weight.·       Students will build a model of a device that could collect plastic from the ocean.·       Students will test the models they build.·       Students will communicate their results from scientific inquiry to identify factors that are important to optimizing the design of the plastic collecting device.
Author:
Jonathan Strunin
Estimated Activity Length:
10 hours
Outdoor Circuitry

Engineering with Renewable Energy: Solar Water Pumping

Grades:
4-5
Description:

Students will learn that energy from a renewable resource can be converted to electrical energy to do work by engineering a water pump system powered by the sun. They will compare the volume of water pumped by different designs and graph data collected and...

+
-
More Details Less Details
Learning Goal(s):
The students will be able to learn what a solar cell looks like and how light energy triggers the cell to release negative charges to move toward the positive side, creating power as it moves from one side to the other. Students will be able to arrange four panels into the correct order to create power for an object and interact with a 3D model of a module to understand how the electricity to power the fan is created. The students will be able to experiment with solar panels (angle, direction) to power a small fan/LED light/circuit board. Students will be able to identify the best position/angle for maximum power. Students will apply scientific ideas to design and test a solar powered water pump that moves water at the fastest rate. Students will experiment and build understanding of parallel and series wiring and how energy moves in these circuits.
Author:
Jamie Repasky
Estimated Activity Length:
2 hours
SODIS_UV Treament

Solar and SODIS: Creating Clean Water for the World

Grades:
5-8
Description:

According to Nobel Laureate Richard Smalley, the number one and two challenges for humanity are energy and clean water. This classroom activity will introduce students to a low cost, renewable technique that connects these two issues. During the activity,...

+
-
More Details Less Details
Learning Goal(s):
Students will be introduced to the range of microbes in the environment, understand the risks of “dirty water” and be able to explain how energy from the sun can purify water through the SODIS technique.
Author:
Jamie Repasky
Estimated Activity Length:
1 hour
Solar Circuit

Using a Multimeter to Analyze a Solar Circuit: Measuring Current and Voltage—Calculating Power and Resistance

Grades:
6-12
Description:

Students will set up a simple circuit using a multimeter and a load resistor to measure the voltage and current in the circuit. Students will learn to use a multimeter, learn how to calculate power and be introduced to Ohm’s Law. This activity provides a...

Energy Content:
+
-
More Details Less Details
Learning Goal(s):
Students will understand that voltage is a measure of a difference in electric potential energy and that current is the rate at which charge flows through a circuit.Students will understand how to measure and quantify electricity. Students will become familiar with the relationships between the fundamental electrical quantities.
Author:
Emily Barrett
Estimated Activity Length:
1 hour
Solar Circuit

Circuit Analysis With Solar Energy: Measure the Power Consumed by Various Devices

Grades:
6-12
Description:

Students will set up a simple circuit using a solar module and three small loads. They will then use a multimeter to measure the voltage across each load and the current through each circuit. Students will then calculate the power consumption and...

+
-
More Details Less Details
Learning Goal(s):
Students will understand that voltage is a measure of a difference in electric potential energy and that current is the rate at which charge flows through a circuit. Students will understand how to measure and quantify electricity. Students will become familiar with the relationships between the fundamental electrical quantities.
Author:
Emily Barrett
Estimated Activity Length:
1 hour

Pages