Part 1 - Lesson 1: Why Use Renewable Energy?

Grades:
6-12
Unit:
A Community Powered by Renewable Energy
Lesson Number:
1
Description:

The purpose of this lesson is for students to obtain base knowledge of how renewable and non-renewable energy is generated and identify differences between renewable resources and fossil fuels. Students will research the potential long-term and short-term...

Energy Content:
Electricity Generation,
Energy Fundamentals,
Fuels,
Solar Photovoltaic,
Sources of Energy,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will define and explain the differences between renewable and non-renewable energy sources.2.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing wind and solar energy.  3.Students will research, summarize, and present the (short- and long-term) benefits and drawbacks of utilizing fossil fuels.4.Students will generate questions about the greenhouse gas effect, identify and isolate variables, and then conduct an experiment to answer a class generated question about the greenhouse gas effect.5.Through Socratic seminar, students will use the knowledge gained over the course of this lesson to discuss the potential long- and short-term benefits and drawbacks of using fossil fuels, solar energy, and wind energy.
Pedagogy & Practice:
English Language Strategies,
Establishing a Culture of Science,
Phenomena-Driven Instruction,
Place-Based Learning,
Project-Based Learning,
Research-Secondary,
Research-Primary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
4: Analyzing and Interpreting Data,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
MS-ESS3-3
Other Subjects Covered:
ELA: Reading: Scientific & Technical,
Math: Graphing & Representation
Estimated Activity Length:
8 hours

How might we design a battery that reduces e-waste? Phenomenon and Exploration

Grades:
4-5
Unit:
Understanding E-Waste Through Battery Design
Lesson Number:
1
Description:

During this introduction lesson series students will explore the guiding phenomenon to understand e-waste and connect it to battery design. Students will utilize online resources to learn about problems from e-waste around the world and the environmental...

Energy Content:
Batteries & Storage,
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons,
Energy Fundamentals,
Fuels,
Hydrogen,
Potential & Kinetic Energy,
Solar Photovoltaic,
Wind Energy
+
-
More Details Less Details
Learning Goal(s):
1.Students will learn about the phenomenon of e-waste through online resources to explore the history of electronics.2.Students will ask questions and define problems involving the environmental impact of electronics and human impact.3.Students will evaluate and obtain information about electronic waste from online resources such as news articles and videos.4.Students will learn (or review) knowledge of circuits to design a model and explain how a circuit works.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Project-Based Learning,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Jonathan Strunin
Relevant NGSS PE:
4-PS3-2,
4-PS3-4,
4-ESS3-1,
5-ESS3-1,
3-5-ETS1-1,
3-5-ETS1-2,
3-5-ETS1-3
Other Subjects Covered:
Environmental Sciences,
ELA: Informational Text,
ELA: Reading: Scientific & Technical,
Math: Graphing & Representation,
Math: Measurement,
Social Sciences: Analysis
Estimated Activity Length:
2 hours

Cost Effective Solar Cells: Researching Chemicals and Materials for Solar Cell Construction

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
10
Description:

This lesson is designed to be completed in three 80-minute sections. The teacher will facilitate student research on solar cell designs centering around the engineering problem: How can we make a cheaper, cleaner or more efficient solar cell? Teachers...

Energy Content:
Circuitry,
Electrical Energy,
Electricity Generation,
Electrons,
Energy Fundamentals,
Materials Science,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will research chemicals, materials and procedures for their own solar cell designsStudents will write an introduction to the problem, including criteria, constraints, and solar cell conceptsStudents will research and write a rough materials and procedure for the solar cellStudents will research and describe their solar cell designs.
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Other Subjects Covered:
ELA: Reading: Scientific & Technical
Estimated Activity Length:
4 hours

Cost Effective Solar Cells: Unique Solar Cell Model Sketch and Presentation

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
11
Description:

This lesson is designed to be completed in two 80-minute sections. The teacher will facilitate brief class presentations on the unique solar cell models. Teachers will model and encourage students to provide warm and cool feedback to the presenters,...

Energy Content:
Circuitry,
Electrical Energy,
Electricity Generation,
Energy Fundamentals,
Materials Science,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will sketch 2D or 3D models of their proposed solar cellsStudents will present their unique solar cell design ideas and sketches of their solar cells
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Hands-on Materials,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Estimated Activity Length:
3 hours
Earth Sun

Individual Independent Projects

Grades:
3-5
Unit:
Cooking with the Sun and Solar Ovens
Lesson Number:
12
Description:

The purpose of this lesson is to allow students to choose an area of interest regarding solar power and research it further in a manner of their choice. Students will produce a final product to display or share at the “Salute to the Sun” culminating event...

Energy Content:
Light (Visible),
Materials Science,
Solar Thermal,
Thermal Energy (Heat)
+
-
More Details Less Details
Learning Goal(s):
Students will plan, gather research materials and create a project of their choice. In doing so student will learn proper research methods (i.e., reliable sources) and how to categorize and translate information. In addition students will become comfortable and familiar presenting information to others. Lastly, students will also learn how to create a rubric for self evaluation.
Pedagogy & Practice:
Culturally Sustaining,
Engineering Design,
Establishing a Culture of Science,
Hands-on Materials,
Multiple Learning Styles,
Project-Based Learning,
Research-Secondary,
STEAM/Arts
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
3: Planning and Carrying Out Investigations,
6: Constructing Explanations and Designing Solutions
Author:
Lisa Morgan
Relevant NGSS PE:
4-ESS3-1,
5-ESS3-1
Other Subjects Covered:
ELA: Informational Text,
ELA: Reading: Scientific & Technical,
ELA: Writing
Estimated Activity Length:
10 hours

Cost Effective Solar Cells: Unique Solar Cell Construction & Testing

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
12
Description:

This lesson is designed to be completed in four 80-minute sections. The teacher will facilitate the construction of unique solar cells for student projects. General chemistry equipment and fabrication equipment will be needed for student construction and...

Energy Content:
Circuitry,
Electrical Energy,
Electricity and Magnetism,
Electricity Generation,
Electrons,
Energy Fundamentals,
Solar Photovoltaic
+
-
More Details Less Details
Learning Goal(s):
Students will construct their unique solar cellsStudents will test unique solar cellsStudents will revise procedures based on solar cell testing resultsStudents will re-build and re-test solar cells
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Hands-on Materials,
Project-Based Learning,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Other Subjects Covered:
Environmental Sciences,
ELA: Reading: Scientific & Technical
Estimated Activity Length:
0 sec

Cost Effective Solar Cells: Construction Progress and Obstacles

Grades:
9-12
Unit:
Cost Effective Solar Cells
Lesson Number:
13
Description:

This lesson is designed to be completed in one 80-minute section. The teacher will facilitate 3-4 groups as they share their construction progress and obstacles. Students will share individual results in a fishbowl setting and will participate in...

Energy Content:
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons,
Energy Fundamentals,
Solar Photovoltaic,
Sources of Energy
+
-
More Details Less Details
Learning Goal(s):
Students will present construction progress and project obstacles
Pedagogy & Practice:
21st Century Skills Development,
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Project-Based Learning,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
5: Using Mathematics and Computational Thinking,
6: Constructing Explanations and Designing Solutions,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Tom Wolverton
Relevant NGSS PE:
HS-PS1-2,
HS-PS2-6,
HS-PS3-3
Other Subjects Covered:
ELA: Reading: Scientific & Technical
Estimated Activity Length:
1 hour
Energy Transformations

What is Energy Transfer?

Grades:
4-6
Unit:
Solar Boats
Lesson Number:
2
Description:

Students will continue to build an understanding of the fundamentals of energy through observing and describing a variety of energy transformations and build on their foundational vocabulary for identifying and discussing energy concepts. In this stage of...

Energy Content:
Electrical Energy,
Energy Fundamentals,
Light (Visible),
Potential & Kinetic Energy,
Solar Photovoltaic,
Sound,
Thermal Energy (Heat)
+
-
More Details Less Details
Learning Goal(s):
Students will obtain the foundational knowledge of energy sources and forms of energy. In addition, students will learn that energy can transfer from one form to another. Students will be able to match images of energy transformations to their respected vocabulary.
Pedagogy & Practice:
Hands-on Materials,
Phenomena-Driven Instruction
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems
Author:
Carol Patrick
Relevant NGSS PE:
4-PS3-2
Estimated Activity Length:
2 hours
Design a 50 Year Energy Plan

Diving into the Physics of Motors and Generators

Grades:
9-12
Unit:
50 Year Energy Plan
Lesson Number:
2
Description:

Using energy analysis and some tinkering students hand wind speakers to play music from a phone. This acts as a phenomenon to engage students in the exploration of electromagnetism. At this point, they have created a motor, which utilizes electric current...

Energy Content:
Circuitry,
Electrical Energy,
Electricity Generation,
Electronics,
Electrons
+
-
More Details Less Details
Learning Goal(s):
1. Through hands-on exploration, create a working speaker for a cellphone. 2. Use the creation of a speaker to observe as a model for the process of generating electrical current in a simple generator/motor. 
Pedagogy & Practice:
Engineering Design,
Group Work/Collaboration,
Hands-on Materials,
Phenomena-Driven Instruction,
Research-Secondary
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
7: Engaging in Argument from Evidence,
8: Obtaining, Evaluating, and Communicating Information
Author:
Bradford Hill
Relevant NGSS PE:
HS-PS2-5,
HS-PS3-3
Estimated Activity Length:
5 hours
Dye in Water

Developing a Model of Thermal Energy, Atoms, and Molecules

Grades:
6-8
Unit:
Chemical Differences in Emergency Energy Sources
Lesson Number:
2
Description:

Through a series of exploration and inquiry activities, students will explain kinetic molecular theory, atomic, and molecular structures. Students will be challenged to gradually increase the precision of their explanation of molecular-level structures...

Energy Content:
Electrons,
Materials Science,
Potential & Kinetic Energy,
Thermal Energy (Heat)
+
-
More Details Less Details
Learning Goal(s):
Students will develop a model through collaborative inquiry to explain thermal kinetic energy and predict the outcome when heat is added to a substance. Students will build argumentation from evidence skills through collaborative sense-making and gallery walk presentations. Students will develop a model of atomic and molecular structures.  
Pedagogy & Practice:
Establishing a Culture of Science,
Group Work/Collaboration,
Hands-on Materials,
Multiple Learning Styles,
Phenomena-Driven Instruction
NGSS Science and Engineering Practices:
1: Asking Questions and Defining Problems,
2: Developing and Using Models,
3: Planning and Carrying Out Investigations,
4: Analyzing and Interpreting Data,
7: Engaging in Argument from Evidence
Author:
Melody Childers
Relevant NGSS PE:
MS-PS1-4
Other Subjects Covered:
ELA: Reading: Literature,
ELA: Speaking & Listening,
ELA: Writing,
ELA: Vocabulary Development,
Math: Graphing & Representation,
Math: Measurement,
Math: Ratios & Proportions
Estimated Activity Length:
9 hours

Pages